Description
Water absorption reducing primer Taktika P
- Reduces water absorption
- Strengthens the surface
- Water vapor permeable
- Water-based
- Low odor
- Environment and health friendly
Use
Water-based acrylic water absorption reducing and surface-strengthening primer for interior and exterior use.
Reduces water absorption of highly absorbent and porous mineral surfaces (e.g. plaster, gas silicate, expanded clay concrete blocks, etc.) and strengthens the surface before applying fillers or wallpapering.
Coverage rate
5-20 m²/l, the exact coverage rate is determined by covering the test area
Technical data
Purpose: for interior and exterior use
Binder: acrylic dispersion
Solvent: water
Color: white, whitish
Density: ~1,000 g/cm³
pH: 7,0-8,5
Volatile organic compounds (VOC): <1 g/l EN ISO 11890-2
Non-volatile-matter content: 9,5-10,5 % EN ISO 3251
Resistance to static water (40±2 °C, 24 h): after 24 hours defect rating 0 (S0) EN ISO 2812-2; EN ISO 4628-1
Work tools: brush, roller, spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and 35–80 % relative humidity. Avoid drafts and direct sunlight during priming. Failure to follow these recommendations, may form poor-quality primer film.
Coverage rate: 5-20 m²/l, the exact coverage rate is determined by covering the test area
Drying time (20 °C, 65 % RH): completely dries in 24 hours. Drying time depends on surface, layer thickness, air temperature, humidity, etc.
Surface preparation
The surface must be dry, firm and clean, free of salts, grease, oil, wax, oil paint, mold, moss and any other contaminants. Dirty building facades should be washed with high-pressure water jet.
Priming
Apply the primer evenly without leaving uncovered areas, avoid run-off.
For highly absorbent surfaces (e.g. plaster, gas silicate, expanded clay concrete blocks, etc.), use primer undiluted.
For priming plasterboard and gypsum plaster, dilute the primer with water in a ratio of 1:1.
Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.
Shelf life in tightly closed original packaging: 24 months from the date of manufacture
Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.
Waste management: do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.
Packing: 1 l, 5 l, 10 l canisters
