Fine-grained filler IGIS MR

For the levelling of concrete, gypsum boards, plaster and other mineral surfaces before painting them with water-based dispersion paints and wallpaper. Fine grain, producing extremely smooth surface, perfect for final finishing layer. Requires no primer before painting.

Category:

Description

  • Forms an extremely smooth and firm surface
  • Water-based
  • Ready to use
  • Easy to apply and smooth up to 1 mm thick layer
  • Quick drying
  • Environment and health friendly

Use

Ready to use fine-grained polymeric filler for interior use. For maximum smooth final finishing of concrete, plasterboard, plaster and other mineral surfaces before water-based paints and wallpaper.

Work Tools: spatula
Tool cleaning: with water
Application conditions: +10 ºC to +25 ºC and (35–80) % relative humidity
Coating thickness: 1 mm
Coverage rate: 1 m²/1,6 kg for 1 mm thick layer
Drying time (23°C, 50% RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

 

Technical data

Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite
Solvent: water
Color: white, yellow white
Density g/cm3: 1,69-1,71
Particle size, mm: <0,025
pH (20°C): 8,0 – 9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
VOC: <1 g/l EN ISO 11890-2
Formaldehyde concentration in filler: VdL-RL 03: 4 ppm or (3,9×10-4) %
Non–volatile–matter content, %: 68,0-69,0 EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: MPa ≥0,3 EN 1542
Non-existence cracks: no cracks in the 50 mm zone from the end of the thin wedge EN 13963
Shelf life: tightly sealed packaging – 1 year from date of manufacture on the packaging

Packing: 1,5 kg, 5 kg, 18 kg buckets, 28 kg bags

Surface preparation: the surface must be dry, capable of withstanding loads, stable and clean. Prime highly or un evenly absorbent surfaces with deep primer IGIS AG.

Filling: stir well before use. Apply the second layer only when the first layer is completely dry. Do not prime before painting, only remove the dust.

Work Tools: spatula
Tool cleaning: with water
Application conditions: +10 ºC to +25 ºC and (35–80) % relative humidity
Coating thickness: 1 mm
Coverage rate: 1 m²/1,6 kg for 1 mm thick layer
Drying time (23°C, 50% RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Utilisation: do not pour into drains, water or soil. Empty, dry product package should be recycled or utilised according to national law.

 

Download

IGIS MR Product Data Sheet

IGIS MR Safety Data Sheet

IGIS MR Declaration Of Performance