Universal filler IGIS KR

Ready for use filler. For the levelling of concrete, gypsum boards, plaster and other mineral surfaces before painting them with water-based dispersion paints and wallpaper. Versatile and suitable for both initial and final puttying.

Category:

Description

Universal filler IGIS KR

  • Water-based
  • Ready to use in a variety of applications
  • Easy to apply and smooth up to 2 mm thick layer
  • Quick drying, forms firm layer
  • Environment and health friendly

Use

Ready to use universal polymeric filler for interior use. For levelling concrete, plasterboard, plaster and other mineral surfaces before water-based paints and wallpaper. The universal filler IGIS KR is suitable for manual application and IGIS KR S for spraying or rolling.
Recommended for both initial (on rough surfaces) and final smoothing. 

Coverage rate

1 m²/1,6 kg for 1 mm thick layer. Maximum thickness of one layer – 2 mm.

Technical data

Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite
Solvent: water
Color: white, yellow white
Density: 1,74-1,78 g/cm³
Particle size: <0,100 mm
pH: 8,0-9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
Volatile organic compounds (VOC): <1 g/l EN ISO 11890-2
Formaldehyde concentration in filler: VdL-RL 03: 3 ppm or (2,8×10-4) %
Non–volatile–matter content: 69,0-71,0 % EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: MPa ≥0,3 EN 1542
Non-existence cracks: no cracks EN 13963

Work tools: spatula, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 ⁰C to +25 ⁰C and 35–80 % relative humidity
Coating thickness: 2 mm
Coverage rate: 1 m²/1,6 kg for 1 mm thick layer
Drying time (23 °C, 50 % RH): 1 mm dries in 2-4 hours and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

Surface preparation
The surface must be dry, capable of withstanding loads, stable and clean. Prime highly or unevenly absorbent surfaces with deep primer IGIS AG.

Filling
Stir well before use. Apply the second layer only when the first layer is completely dry. Before painting sand the filled surface and remove the dust.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Shelf life in tightly closed original packaging: 1 year from the date of manufacture

Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.

Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.

Packing:
IGIS KR
1,5 kg, 5 kg, 18 kg buckets, 28 kg bags
IGIS KR S
28 kg bags

Download

IGIS KR Declaration Of Performance

IGIS KR Safety Data Sheet

IGIS KR Product Data Sheet