Primer before painting Taktika B

Primer evens the absorption of mineral surfaces before painting with water-based dispersion paint.



Primer before painting Taktika B

  • Evens out the absorption
  • Facilitates painting, repairing of defects in the smoothed surface before painting
  • Reduces paint consumption
  • Forms a deep matt film
  • Water-based
  • Water vapor permeable
  • Environment and health friendly


Water-based acrylic copolymer primer before painting for interior use. Evens the absorption of mineral surfaces (concrete, plaster, putty, masonry, gypsum boards, painted wallpaper, etc.) before painting with water-based dispersion paint.

Coverage rate

8-10 m²/l, applied in 1 layer.

Technical data

Purpose: for interior use
Binder: acrylic copolymer
Solvent: water
Color: white or tinted by color cards
Density: 1,230-1,250 g/cm³
pH: 8,0-9,0
Volatile organic compounds (VOC): <15 g/l EN ISO 11890-2
Non-volatile-matter content by volume: 21,0-24,0 % LST EN ISO 3251
Classification by maximum grain size: fine (to 100 μm) EN 13300+AC
Degree of gloss, 85⁰: <5 (dead matt) EN 13300+AC
Resistance to static water (40±2 ⁰C, 24 h): after 24 hours defect rating 0 (S0) EN ISO 2812-2; EN ISO 4628-1

Work tools: brush, roller, spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and 35–80 % relative humidity. Avoid drafts and direct sunlight during priming. Failure to follow these recommendations, may form poor-quality primer film.
Coverage rate: 8-10 m²/l, applied in 1 layer. The exact coverage rate is determined by covering the test area.
Drying time (23 °C, 50 % RH): completely dries in 24 hours. Drying time depends on surface, layer thickness, air temperature, humidity, etc.

Surface preparation
The surface must be stable, dry and clean. Sand  the filled surface and remove the dust.

Stir well before use. Using a roller, apply one coat of primer in the same direction and roll well to a smooth surface (without texture). If you apply the primer with a sprayer, after spraying, roll it well with a roller.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Shelf life in tightly closed original packaging: 24 months from the date of manufacture

Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.

Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.

Packing: 1 l, 3 l, 10 l buckets


Taktika B Product Data Sheet

Taktika B Safety Data Sheet

Taktika B Declaration Of Performance