Universal filler TAKTIKA G

Ready for use filler. For the levelling of concrete, gypsum boards, plaster and other mineral surfaces before painting them with water-based dispersion paints and wallpaper. Versatile and suitable for both initial and final puttying.



  • One product for almost all finishing applications
  • Up to 3 times faster process
  • Water-based
  • Ready to use in a variety of applications
  • Extremely easy to apply and smooth up to 2 mm thick layer
  • Excellent vapor permeability, no cracking, elastic
  • Brightens when drying
  • Low water absorption ensures lower paint consumption
  • Less dust
  • Lightweight, convenient to use and transport
  • Environment and health friendly


For leveling concrete, plasterboard, plaster and other mineral surfaces before water-based paints and wallpaper. Perfect for finishing corners, AK type plasterboard joints. Recommended for both initial (on rough surfaces) and final smoothing applications.

The multipurpose filler TAKTIKA G is suitable for manual application and TAKTIKA GM for spraying or rolling.

Work Tools: spatula, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 ºC to +25 ºC and (35–80) % relative humidity
Coating thickness: 2 mm
Coverage rate: 1 m²/l for 1 mm thick layer
Drying time (23°C, 50% RH): can be sanded after 2-4 hours, and gains full strength in 28 days. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

Technical data

Purpose: for interior use, dry areas
Binder: acrylic copolymer
Filler: dolomite, perlite, microspheres
Solvent: water
Color: grey (brightens when drying)
Density g/cm3: 1,12-1,25 EN ISO 2811-1
Particle size, mm: ≤0,15, max. 0,2
pH (20°C): 8,0 – 9,0
Quality standards and certificates: CE marking EN 15824, EN 13963
VOC: <1 g/l EN ISO 11890-2
Formaldehyde concentration in filler: VdL-RL 03: 5 ppm or (5,3×10-4) %
Non–volatile–matter content, %: 57,0-58,0 EN ISO 3251
Reaction to fire: A2-s1,d0 EN 13501-1
Adhesion: MPa ≥0,3 EN 1542
Non-existence cracks: no cracks in the 50 mm zone from the end of the thin wedge EN 13963
Shelf life: tightly sealed packaging – 1 year from date of manufacture on the packaging

Packing: TAKTIKA G: 3l, 10l buckets, 17l bags
                TAKTIKA GM: 17l bags

Surface preparation: the surface must be dry, capable of withstanding loads, stable and clean. Prime highly or un evenly absorbent surfaces with deep primer IGIS AG.

Filling: stir well before use. Fill the joints of AK-type gypsum boards with filler, press the joint tape immediately and leave to dry. Other types of joints shall be filled with joint filler IGIS T. Smoothing layer may be applied only when the joints are completely dry. The second layer may be applied when the first layer is dried. Do not prime before painting, only remove the dust.

Application conditions: +10 ºC to +25 ºC and (35–80) % relative humidity
Coating thickness: 2 mm
Coverage rate: 1 m²/l for 1 mm thick layer

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Utilisation: do not pour into drains, water or soil. Empty, dry product package should be recycled or utilised according to national law.


Taktika G Product Data Sheet 

Taktika G Declaration Of Performance

Taktika G Safety Data Sheet

Taktika G M Safety Data Sheet