Primer before decorative plaster and structural paint IGIS TEX

A primer with quartz sand for priming mineral surfaces (concrete, plaster, gypsum plasterboards) prior to plastering them with acrylic or silicone decorative plaster, as well as before painting them with structural paints. Suitable for priming of liquid wallpaper. For interior and exterior work.

Categories: ,


Primer before decorative plaster, structural paint and liquid wallpaper IGIS TEX

  • Improves adhesion
  • Evens out the absorption
  • Easy to apply
  • Ensures even drying
  • Forms a vapor permeable layer
  • Environment and health friendly


Acrylic copolymer primer for interior use. Evens out the surface absorption and shade, intended to enhance the adhesion of decorative plaster, structural paint, liquid wallpaper with concrete or plaster surfaces.

Coverage rate

4-5 m²/l

Technical data

Purpose: for interior use
Binder: acrylic copolymer
Solvent: water
Color: white or tinted by color cards
Density: 1,62-1,65 g/cm³
pH: 8,0-9,0
Volatile organic compounds (VOC): <2 g/l EN ISO 11890-2
Formaldehyde concentration in the tare: VdL-RL 03: 6 ppm or (6×10-4)%
Classification by maximum grain size: coarse (to 1500 μm) EN 13300
Non-volatile-matter content by volume: ~50,0 %
Resistance to static water (23±2 °C, 24h): after 24 hours defect rating 0 EN ISO 2812-2; EN ISO 4628-1

Work Tools: brush, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity
Coverage rate: 4-5 m²/l
Drying time (20°C, 65% RH): 2–2,5 hours. Dries completely after ~24 hours, depending on the surface, layer thickness, air temperature, humidity, etc.

Surface preparation
The surface must be dry, withstanding loads, stable and clean. Fresh concrete layer may be primed not earlier than after 14 days and must be completely firm.

Stir well before and during use. Apply one coat of the primer.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Shelf life in tightly closed original packaging: 24 months from the date of manufacture

Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.

Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.

Packing: 1 l, 3 l, 10 l buckets


IGIS TEX Safety Data Sheet

IGIS TEX Declaration Of Performance

IGIS TEX Product Data Sheet