Deep primer

IGIS AG

A primer for managing the absorbtion of porous and moisture absorbing surfaces (concrete, plaster, and gypsum plasterboards) before applying  filler or wallpaper. Perfect for the priming of mineral substrates before tiling them using solvent-free glue. For interior and exterior work.

Category:

Description

  • Water-based
  • Deep-penetrating
  • Surface-strengthening
  • Water vapor permeable
  • Environment and health friendly

Use

Water-based acrylic deep-acting primer for interior and exterior use. To even out moisture absorption of porous mineral surfaces (e. g. concrete, plaster, plasterboard, etc.) and strengthen the surface before applying fillers or wallpapering.

Work Tools: brush, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10°C to +25°C and (35–80) % relative humidity
Coverage rate: 5-20 m²/l, the exact coverage rate is determined by covering the test area
Drying time (20°C, 50% RH): the surface dries in 1 hour. Completely dries in 24 hours. Drying time depends on surface, layer thickness, air temperature, humidity, etc.

Technical data

Purpose: for interior and exterior use
Binder: acrylic dispersion
Solvent: water
Color: white, whitish
Density (20°C): ~ 1,000 g/cm³
pH (20°C): 7,0 – 8,5
Volatile organic compound (VOC): < 1 g/l EN ISO 11890-2
Formaldehyde concentration in the tare: VdL-RL 03: 0 ppm or (0x10-4) %
Non-volatile-matter content: (5,5-7,0) % EN ISO 3251
Resistance to static water (23±2 °C, 24h): after 24 hours defect rating 0 EN ISO 2812-2; EN ISO 4628-1
Shelf life: tightly sealed packaging – 24 months from date of manufacture on the packaging

Packing: 1l, 5l, 10l canisters

Surface preparation: the surface must be dry, firm and clean, free of salts, grease, oil, wax, oil paint, mold, moss and any other contaminants. Dirty building facades should be washed with high-pressure water jet.

Priming: apply the primer evenly without leaving uncovered areas, avoid run-off.

Work Tools: brush, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10°C to +25°C and (35–80) % relative humidity
Coverage rate: 5-20 m²/l, the exact coverage rate is determined by covering the test area
Drying time (20°C, 50% RH): the surface dries in 1 hour. Completely dries in 24 hours. Drying time depends on surface, layer thickness, air temperature, humidity, etc.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Utilisation: do not pour into drains, water or soil. Empty, dry product package should be recycled or utilised according to national law

Download

IGIS AG Product Data Sheet

IGIS AG Declaration Of Performance

IGIS AG  Safety Data Sheet