Decorative plaster for interior

Acrylic decorative plaster with 1 mm or 1.5 mm natural marble rubble, which provides a decorative rough texture for the walls. Easy to apply, well-adhering, moisture resistant, low odour, and harmless to the environment and human health.

 

Category:

Description

  • Easy to apply
  • Firmly adheres to mineral substrates
  • Forms a vapor permeable layer
  • Environment and health friendly

Use

Decorative acrylic copolymer internal plaster with natural marble granules. For decorative finishing of mineral surfaces such as concrete, plaster, brick masonry, plasterboard, etc.

Work Tools: grinder, spatula, airless spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity
Coverage rate: 1,5-2 kg/m², the exact coverage rate is determined by covering the test area
Drying time (20°C, 65% RH): 24 hours. The plaster dries completely and withstands the load in 2-3 days.

Technical data

Purpose: for interior use
Binder: acrylic copolymer
Solvent: water
Color: white or colored
Density (20°C): (1,83 – 1,98) g/cm³
pH (20°C): 8,3 – 9,3
Volatile organic compound (VOC): < 8,0 g/l EN ISO 11890-2
Volume solids: (61,5 -71) % (depending of the plaster type)
Adhesion (after 28 days): ≥ 0,3 MPa EN 1542
Shelf life: tightly sealed packaging – 24 months from date of manufacture on the packaging

Packing: 17 kg buckets

Surface preparation: the surface must be dry, withstanding loads, stable and clean. Prime the surface with IGIS TEX.

Plastering: stir well before and during use. Apply a layer of plaster to a thickness equal to the size of the largest grains and smooth. When the plaster does not stick to the tool, smooth the surface with a polyurethane plate or plastic plate for the desired texture. Avoid draught while the plaster hardens.

Work Tools: grinder, spatula, airless spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity
Coverage rate: 1,5-2 kg/m², the exact coverage rate is determined by covering the test area
Drying time (20°C, 65% RH): 24 hours. The plaster dries completely and withstands the load in 2-3 days.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Utilisation: do not pour into drains, water or soil. Empty, dry product package should be recycled or utilised according to national law.

Download

IGIS DTV Product Data Sheet

IGIS DTV 1,0 mm Declaration Of Performance

IGIS DTV 1,5 mm Declaration Of Performance

IGIS DTV 1,5 mm S Declaration Of Performance

IGIS DTV Safety Data Sheet