Primer before decorative plaster

IGIS TEX

A primer with quartz sand for priming mineral surfaces (concrete, plaster, gypsum plasterboards) prior to plastering them with acrylic or silicone decorative plaster, as well as before painting them with structural paints. Suitable for priming of liquid wallpaper. For interior and exterior work.

Categories: ,

Description

  • Improves adhesion
  • Evens out the absorption
  • Easy to apply
  • Ensures even drying
  • Forms a vapor permeable layer
  • Environment and health friendly

Use

Acrylic copolymer primer for interior use. Intended to enhance the adhesion of decorative plaster, structural paint, liquid wallpaper or filling concrete or plaster surfaces.

Work Tools: brush, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity
Coverage rate: 4-5 m²/l
Drying time (20°C, 65% RH): 2 – 2.5 hours. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

Technical data

Purpose: for interior use
Binder: acrylic copolymer
Solvent: water
Color: white or colored
Density (20°C): (1,62 – 1,65) g/cm³
pH (20°C): 8,0 – 9,0
Volatile organic compound (VOC): < 2 g/l EN ISO 11890-2
Formaldehyde concentration in the tare: VdL-RL 03: 6 ppm or (6×10-4) %
Classification by maximum grain size: coarse (to 1500 μm) EN 13300
Volume solids: ~ 50,0 %
Resistance to static water (23±2 °C, 24h): after 24 hours defect rating 0 EN ISO 2812-2; EN ISO 4628-1
Shelf life: tightly sealed packaging – 24 months from date of manufacture on the packaging

Packing: 1l, 3l, 10l buckets

Surface preparation: the surface must be dry, withstanding loads, stable and clean. Fresh concrete layer may be primed not earlier than after 14 days and must be completely firm.

Priming: stir well before and during use. Apply one coat of the primer.

Work Tools: brush, roller, airless spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity
Coverage rate: 4-5 m²/l
Drying time (20°C, 65% RH): 2 – 2.5 hours. Drying time depends on surface, layer thickness, air temperature and humidity, etc.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H) -one, can cause allergy in humans.

Utilisation: do not pour into drains, water or soil. Empty, dry product package should be recycled or utilised according to national law.

Download

IGIS TEX Product Data Sheet

IGIS TEX Declaration Of Performance

IGIS TEX Safety Data Sheet