Structural paint IGIS STR

For structural painting and the formation of a design layer on interior walls and ceilings made from mineral building materials, relief decoration (plaster, drywall panels, painted surfaces, painted wallpaper, brick masonry, concrete, etc.).A decorative texture can be obtained on the walls by applying the paint with different tools.

Categories: ,


Structural paint IGIS STR

  • Water-based
  • Elastic
  • Fast drying
  • Hides surface irregularities
  • Forms a vapor permeable layer
  • Environment and health friendly


For embossed decorative layer for interior walls and ceilings made of mineral construction materials (plaster, plasterboard, wallpaper, brick masonry, concrete, etc.). Suitable for textured painting and decoration of walls and ceilings of residential houses, public buildings.

Coverage rate

1,5-4 m²/l, applied in 2 layers. The exact coverage rate is determined by covering the test area.

Technical data

Purpose: for interior use
Binder: styrene acrylic copolymer
Solvent: water
Color: white or tinted by color cards
Density: 1,60-1,64 g/cm³
pH: 8,0-9,0
Volatile organic compounds (VOC): <16 g/l EN ISO 11890-2
Non-volatile-matter content by volume: ~50,0 %
Classification by maximum grain size: medium (to 300 μm) EN 13300
Adhesion (after 28 days): ≤1,0 MPa EN 1542

Work tools: brush, structural roller, spatula, spraying gun
Tool cleaning: with water
Application conditions: +10 °C to +25 °C and (35–80) % relative humidity. Avoid drafts and direct sunlight during painting. Failure to follow these recommendations, may form poor-quality paint film.
Coverage rate: 1,5-4 m²/l, applied in 2 layers
Drying time (23 °C, 50 % RH): dust does not stick after 1 hour, repainting can be done after 24 hours. Drying time depends on surface, layer thickness, air temperature, humidity, etc.

Surface preparation
The surface must be stable, dry and clean. Treat the surface affected by fungi and mold with an anti-mold agent. Sand glossy or filled dry surface and remove the dust. To strengthen the surface and reduce moisture absorption prime porous surfaces (such as bricks, masonry, concrete, dense blocks) with IGIS AG or IGIS TEX. Apply paints only when the primer is completely dry.

Stir well before use. Apply 1-2 layers. Paint of the same batch shall be used to cover one surface. Stir them in one tare to ensure color uniformity. Apply and form structural paint on one entire surface area evenly and consistently, continue painting only near the paint that has not yet started to dry.
The shape and size of the paint texture can be obtained using various tools: brushes, wide brushes, spatulas, special rollers. Fine texture is obtained by painting with a short pile paint roller, a larger texture – by painting with a structural roller, brush.

The surface film acquires full strength and can be cleaned after 28 days. Clean the dirty painted surface with a dry soft brush or dry cloth.

Precautionary statements: keep out of reach of children, avoid release to the environment, wear protective gloves/ protective clothing/eye protective/face protective. IF ON SKIN: wash with plenty of soap and water. IF IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Additional hazard information: EUH208 – contains a mixture of 5-chlor-2-metil-2H-izotiazol-3-one and 2-metil-2H-izotiazol -3-one (3:1), 1,2-benzisothiazol-3(2H)-one can cause allergy in humans.

Shelf life in tightly closed original packaging: 24 months from the date of manufacture

Storage and transportation conditions: store the product tightly closed in dry well-ventilated place at a temperature of +5 ⁰C to +30 ⁰C, protect against from damage, frost and direct sunlight.

Waste management
Do not pour into drains, water or soil. Empty, dry product package should be recycled or disposed of in accordance with national law.

Packing: 3 l, 10 l buckets


IGIS STR Product Data Sheet

IGIS STR Safety Data Sheet

IGIS STR Declaration Of Performance